ICS1893YI-10LF IDT, Integrated Device Technology Inc, ICS1893YI-10LF Datasheet - Page 52

• Manufacturer Part Number: ICS1893YI-10LF
• Description: PHYCEIVER LOW PWR 3.3V 64-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Series: PHYceiver™r
• Type: PHY Transceiverr

Specifications of ICS1893YI-10LF

• Protocol: MII
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 64-TQFP, 64-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 1893YI-10LF

6.4.7 100Base-TX Operation: Auto Polarity Correction
6.4.8 100Base-TX Operation: Isolation Transformer
ICS1893Y-10 Rev F 1/20/04
The ICS1893Y-10 can sense and then automatically correct a signal polarity that is reversed on its
Twisted-Pair Receiver inputs. A signal polarity reversal occurs when the input signals on the TP_RXP and
TP_RXN pins are crossed or swapped (a problem that can occur during network installation or wiring). This
function is primarily a 10Base-T function, however, it is also active during Auto-Negotiation. For more
information on the 10Base-T Auto Polarity Correction, see
Polarity Correction”
The ICS1893Y-10 interfaces with a medium through isolation transformers. The PHY requires two isolation
transformers: one for its Twisted-Pair Transmitter and the other for its Twisted-Pair Receiver. These
isolation transformers provide both physical isolation as well as the means for coupling a signal between
the ICS1893Y-10 and the medium for both 10Base-T and 100Base-TX operations.
Note:
ICS1893Y-10 Data Sheet - Release
For information on isolation transformers (also referred to as magnetic modules), see
“Twisted-Pair
Interface”.
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
52
Section 6.5.13, “10Base-T Operation: Auto
Chapter 6 Functional Blocks
January, 2004
Section 5.5,