STMPE2403TBR STMicroelectronics, STMPE2403TBR Datasheet - Page 24

• Manufacturer Part Number: STMPE2403TBR
• Description: IC I/O EXPANDER I2C 24B 36TFBGA
• Manufacturer: STMicroelectronics

Specifications of STMPE2403TBR

• Interface: I²C
• Number Of I /o: 24
• Interrupt Output: Yes
• Frequency - Clock: 400kHz
• Voltage - Supply: 1.65 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-TFBGA
• Includes: Keypad, POR, PWM
• For Use With: 497-8206 - BOARD DEMO EXPANDER STMPE2403
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Clocking system
8.2
24/63
Power mode programming sequence
To put the device in sleep mode, the following needs to be done by the host:
Write a '1' to bit 4 of the SYSCON register.
To wakeup the device, the following needs to be done by the host:
Assert a wakeup routine on the I2C bus by sending the Start Bit, followed by the device
address and the Write bit. Subsequently, proceed with sending the Base Register address
and continue with a normal I2C transaction. The device wakes up upon receiving the
correct device address and in Write direction. In other words, the procedure of waking up
the device is performed by just sending an I2C transaction to the device. This procedure
can be extended to wake up the device that is in hibernate mode.
To do a soft reset to the device, the host needs to do the following:
Write a '1' to bit 7 of the SYSCON register.
This bit is automatically cleared upon reset.
To go into Hibernate mode, the following needs to be done by the host:
Set the Disable_32K bit to '1'
To come out of the Hibernate mode, the following needs to be done by the host:
Assert a system reset or
Put a wakeup on the I2C
STMPE2403