PCA9544APW,112 NXP Semiconductors, PCA9544APW,112 Datasheet - Page 22

• Manufacturer Part Number: PCA9544APW,112
• Description: IC I2C MUX 4CH BI-DIR 20-TSSOP
• Manufacturer: NXP Semiconductors

Specifications of PCA9544APW,112

• Package / Case: 20-TSSOP
• Applications: 4-Channel I²C Multiplexer
• Interface: I²C
• Voltage - Supply: 2.3 V ~ 3.6 V, 4.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Product: Decoders, Encoders, Multiplexers & Demultiplexers
• Logic Family: PCA
• Number Of Lines (input / Output): 8.0 / 10.0
• Propagation Delay Time: 0.3 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.3 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Number Of Input Lines: 8.0
• Number Of Output Lines: 10.0
• Power Dissipation: 400 mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1045-5; 935275806112; PCA9544APW

NXP Semiconductors
PCA9544A_4
Product data sheet
13.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 10.
Table 11.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 10
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
11
19.
Rev. 04 — 15 June 2009
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
4-channel I
3
3
)
)
Figure
350 to 2000
260
250
245
2
C-bus multiplexer with interrupt logic
19) than a SnPb process, thus
220
220
350
PCA9544A
> 2000
260
245
245
© NXP B.V. 2009. All rights reserved.
22 of 26