PPC405GPR-3BB400 Applied Micro Circuits Corporation, PPC405GPR-3BB400 Datasheet - Page 37

• Manufacturer Part Number: PPC405GPR-3BB400
• Manufacturer: Applied Micro Circuits Corporation

Specifications of PPC405GPR-3BB400

• Family Name: 405GPr
• Device Core: PowerPC
• Device Core Size: 32b
• Frequency (max): 400MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 1.8/1.85V
• Operating Supply Voltage (max): 1.9V
• Operating Supply Voltage (min): 1.7/1.8V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 456
• Package Type: EBGA
• Lead Free Status / Rohs Status: Not Compliant

Revision 2.05 – March 24, 2008
Signal Functional Description
Multiplexed signals are shown in brackets following the first signal name assigned to each multiplexed ball.
Notes:
1. Receiver input has hysteresis.
2. Must pull up. See “Pull-Up and Pull-Down Resistors” on page 29 for recommended termination values.
3. Must pull down. See “Pull-Up and Pull-Down Resistors” on page 29 for recommended termination values.
4. If not used, must pull up.
5. If not used, must pull down.
6. Strapping input during reset; pull up or pull down as required.
7. Pull-up may be required. See “External Bus Control Signals” on page 29.
AMCC
Ground pins
OV
V
Other pins
DD
DD
pins
[TrcClk]GPIO9
Signal Name
pins
Reserved
OV
GND
Data Sheet
V
DD
DD
Trace interface clock. A toggling signal that is always half of the CPU
core frequency. To access this function, software must toggle a DCR
bit
or
General Purpose I/O.
Note: Initialization strapping must hold this pin low (0) during reset.
Ground
Output driver voltage—3.3V.
Logic voltage—1.8V.
Reserved—Except for AF4, do not connect signals, voltage, or
ground to these pins. AF4 must be tied to OV
Note: L11-L16, M11-M16, N11-N16, P11-P16, R11-R16, and
T11-T16 are also thermal balls.
(Sheet 8 of 8)
Description
405GPr – Power PC 405GPr Embedded Processor
DD
or GND.
O[I/O]
I/O
3.3V LVTTL
5V tolerant
Type
Notes
1, 6
37