IDT82P2816BB IDT, Integrated Device Technology Inc, IDT82P2816BB Datasheet - Page 23

• Manufacturer Part Number: IDT82P2816BB
• Description: IC LIU T1/J1/E1 16+1CH 416-PBGA
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT82P2816BB

• Function: Line Interface Unit (LIU)
• Interface: E1, J1, T1
• Number Of Circuits: 1
• Voltage - Supply: 1.8V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: Defect and Alarm Detection, Driver Over-Current Detection and Protection, LLOS Detection, PRBSARB / IB Detection and Generation
• Number Of Transceivers: 1
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Supply: -
• Power (watts): -
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant
• Other names: 82P2816BB

Pin Description
IDT82P2816
(N=0~16)
(N=0~16)
VDDRn
VDDTn
VDDIO
GNDD
VDDA
VDDD
GNDA
GNDT
Name
TDO
TDI
NC
IC
Pull-up
Output
Input
I / O
-
-
U23, V2, V3, V23, AE1, AE2, AE25,
K10, K11, K12, K13, K14, K15, K16,
P10, P11, P12, P13, P14, P15, P16,
R15, R16, R17, T10, T11, T12, T13,
T14, T15, T16, T17, U10, U11, U12,
J3, K3, N3, P3, U3, T24, R24, M24,
J2, K2, N2, P2, U2, T25, R25, M25,
D22, W23, AA4, AA23, AC4, AC11,
B3, B4, D3, E25, F25, G2, H2, J25,
A7, B7, C7, D7, D8, D9, D19, D21,
K17, L10, L11, L12, L13, L14, L15,
L24, H24, G24, D24, D23, C6, C5,
L25, H25, G25, B24, B23, B6, B5,
B26, D4, E23, F23, G4, H4, J23,
M14, M15, M16, M17, N10, N11,
C1, C2, C25, C26, D1, D2, D25,
C11, D11, D13, D15, D17, AC5,
L16, L17, M10, M11, M12, M13,
N12, N13, N14, N15, N16, N17,
A1, A2, A25, A26, B1, B2, B25,
K23, L4, M4, N23, P23, R4, T4,
P17, R10, R11, R12, R13, R14,
K25, L2, M2, N25, P25, R2, T2,
AC7, AC9, AC18, AC20, AC23
AE26, AF1, AF2, AF25, AF26
U13, U14, U15, U16, U17
D26, W1, W2, W25, W26
AC13, AC15
U25, V25
Pin No.
E3, F3
E2, F2
AE10
AD8
AF8
C22
TDI: JTAG Test Data Input
The test data is input on this pin. It is clocked into the device on the rising edge of TCK. This
pin has an internal pull-up resistor.
This pin may be left unconnected when JTAG is not used.
TDO: JTAG Test Data Output
The test data is output on this pin. It is clocked out of the device on the falling edge of TCK.
TDO is a High-Z output signal except during the process of data scanning.
VDDIO: 3.3 V I/O Power Supply
VDDA: 3.3 V Analog Core Power Supply
VDDD: 1.8 V Digital Core Power Supply
VDDRn: 3.3 V Power Supply for Receiver
VDDTn: 3.3 V Power Supply for Transmitter Driver
GNDA: GND for Analog Core / Receiver
GNDD: Digital GND
GNDT: Analog GND for Transmitter Driver
IC: Internal Connected
This pin is for IDT use only and should be connected to GNDD.
NC: Not Connected
Power & Ground
16(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
Others
TEST
23
Description
February 6, 2009