SC26C92C1B,557 NXP Semiconductors, SC26C92C1B,557 Datasheet - Page 2

• Manufacturer Part Number: SC26C92C1B,557
• Description: IC UART DUAL W/FIFO 44PQFP
• Manufacturer: NXP Semiconductors

Specifications of SC26C92C1B,557

• Features: Transceiver
• Number Of Channels: 2, DUART
• Fifo's: 8 Byte
• Voltage - Supply: 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 44-MQFP, 44-PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935248790557; SC26C92C1B; SC26C92C1B

Philips Semiconductors
DESCRIPTION
The SC26C92 is a pin and function replacement for the SCC2692
and SCN2681 with added features and deeper FIFOs. Its
configuration on power up is that of the 2692. Its differences from
the 2692 are: 8 character receiver, 8 character transmit FIFOs,
watch dog timer for each receiver, mode register 0 is added,
extended baud rate and overall faster speeds, programmable
receiver and transmitter interrupts. (The SCC2692 is not being
discontinued.)
The Philips Semiconductors SC26C92 Dual Universal
Asynchronous Receiver/Transmitter (DUART) is a single-chip
CMOS-LSI communications device that provides two full-duplex
asynchronous receiver/transmitter channels in a single package. It
interfaces directly with microprocessors and may be used in a polled
or interrupt driven system and provides modem and DMA interface.
The operating mode and data format of each channel can be
programmed independently. Additionally, each receiver and
transmitter can select its operating speed as one of 27 fixed baud
rates, a 16X clock derived from a programmable counter/timer, or an
external 1X or 16X clock. The baud rate generator and
counter/timer can operate directly from a crystal or from external
clock inputs. The ability to independently program the operating
speed of the receiver and transmitter make the DUART particularly
attractive for dual-speed channel applications such as clustered
terminal systems.
Each receiver and transmitter is buffered by eight character FIFOs
to minimize the potential of receiver overrun, transmitter underrun
and to reduce interrupt overhead in interrupt driven systems. In
addition, a flow control capability is provided via RTS/CTS signaling
to disable a remote transmitter when the receiver buffer is full.
Also provided on the SC26C92 are a multipurpose 7-bit input port
and a multipurpose 8-bit output port. These can be used as general
purpose I/O ports or can be assigned specific functions (such as
clock inputs or status/interrupt outputs) under program control.
The SC26C92 is available in three package versions: 40-pin 0.6”
wide DIP, a 44-pin PLCC and 44–pin plastic quad flat pack (PQFP).
FEATURES
ORDERING INFORMATION
2000 Jan 31
40-Pin Plastic Dual In-Line Package (DIP)
44-Pin Plastic Leaded Chip Carrier (PLCC)
44–Pin Plastic Quad Flat Pack (PQFP)
Dual full-duplex independent asynchronous receiver/transmitters
8 character FIFOs for each receiver and transmitter
Programmable data format
– 5 to 8 data bits plus parity
– Odd, even, no parity or force parity
– 1, 1.5 or 2 stop bits programmable in 1/16-bit increments
16-bit programmable Counter/Timer
Dual universal asynchronous receiver/transmitter (DUART)
DESCRIPTION
DESCRIPTION
V
CC
= +5V 10%, T
COMMERCIAL
SC26C92C1N
SC26C92C1A
SC26C92C1B
A
= 0 to +70 C
2
1
Programmable baud rate for each receiver and transmitter
selectable from:
– 27 fixed rates: 50 to 230.4k baud
– Other baud rates to 230.4k baud at 16X
– Programmable user-defined rates derived from a
– External 1X or 16X clock
Parity, framing, and overrun error detection
False start bit detection
Line break detection and generation
Programmable channel mode
– Normal (full-duplex)
– Automatic echo
– Local loopback
– Remote loopback
– Multidrop mode (also called ‘wake-up’ or ‘9-bit’)
Multi-function 7-bit input port
– Can serve as clock, modem, or control inputs
– Change of state detection on four inputs
– Inputs have typically >100k pull-up resistors
Multi-function 8-bit output port
– Individual bit set/reset capability
– Outputs can be programmed to be status/interrupt signals
– FIFO states for DMA and modem interface
Versatile interrupt system
– Single interrupt output with eight maskable interrupting
– Output port can be configured to provide a total of up to six
– Each FIFO can be programmed for four different interrupt levels
– Watch dog timer for each receiver
Maximum data transfer rates:
1X – 1Mb/sec, 16X – 1Mb/sec
Automatic wake-up mode for multidrop applications
Start-end break interrupt/status
Detects break which originates in the middle of a character
On-chip crystal oscillator
Power down mode
Receiver timeout mode
Single +5V power supply
Powers up to emulate SCC2692
programmable counter/timer
conditions
separate wire-ORable interrupt outputs
V
CC
= +5V 10%, T
SC26C92A1N
SC26C92A1A
SC26C92A1B
INDUSTRIAL
A
= -40 to +85 C
Product specification
SC26C92
853–1585 23061
SOT307–2
SOT129-1
SOT187-2
DWG #
DWG #