AT90USB647 Atmel Corporation, AT90USB647 Datasheet - Page 38

• Manufacturer Part Number: AT90USB647
• Manufacturer: Atmel Corporation

Specifications of AT90USB647

• Flash (kbytes): 64 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 48
• Ext Interrupts: 16
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 2
• Twi (i2c): 1
• Uart: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 4
• Eeprom (bytes): 2048
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 10
• Input Capture Channels: 1
• Pwm Channels: 9
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

38
AT90USB64/128
Note:
Assembly Code Example
C Code Example
#define OFFSET 0x4000
void XRAM_example(void)
{
}
; OFFSET is defined to 0x4000 to ensure
; external memory access
; Configure Port C (address high byte) to
; output 0x00 when the pins are released
; for normal Port Pin operation
ldi
out
ldi
out
; release PC7:6
ldi
sts
; write 0xAA to address 0x0001 of external
; memory
ldi
sts
; re-enable PC7:6 for external memory
ldi
sts
; store 0x55 to address (OFFSET + 1) of
; external memory
ldi
sts
unsigned char *p = (unsigned char *) (OFFSET + 1);
DDRC = 0xFF;
PORTC = 0x00;
XMCRB = (1<<XMM1);
*p = 0xaa;
XMCRB = 0x00;
*p = 0x55;
1. See “About Code Examples” on page 9.
r16, 0xFF
DDRC, r16
r16, 0x00
PORTC, r16
r16, (1<<XMM1)
XMCRB, r16
r16, 0xaa
0x0001+OFFSET, r16
r16, (0<<XMM1)
XMCRB, r16
r16, 0x55
0x0001+OFFSET, r16
(1)
(1)
7593K–AVR–11/09