TDA8551_T NXP Semiconductors, TDA8551_T Datasheet - Page 7

• Manufacturer Part Number: TDA8551_T
• Description: The TDA8551; TDA8551T is a one channel 1 WBridge-Tied Load (BTL) audio power amplifier capable ofdelivering 1 W output power to an 8 Ω load at THD = 10%using a 5 V power supply
• Manufacturer: NXP Semiconductors

NXP Semiconductors
Notes to the Characteristics
1. With a load connected at the outputs the quiescent current will increase, the maximum of this increase being equal
2. The DC output voltage with respect to ground is approximately 0.5V
3. Output voltage in mute position is measured with an input of 1 V (RMS), including noise, in a bandwidth of 20 kHz.
4. Total gain setting at +20 dB.
5. The noise output voltage is measured at the output in a frequency band from 20 Hz to 20 kHz (unweighted), input
6. Supply voltage ripple rejection is measured at the output, with a source impedance of R
1998 Feb 23
handbook, full pagewidth
1 W BTL audio amplifier with digital volume
control
The rise time (t
to the DC output offset voltage divided by R
source impedance R
The ripple voltage is a sine wave with frequency of 1 kHz and an amplitude of 100 mV (RMS) is applied to the positive
supply rail.
V UP/DOWN
V th(DOWN)
V float(max)
V float(min)
r
) and the width of the pulse (t
V th(UP)
V P
0
source
= 0 Ω.
t r
w
) are not critical.
t rep
Fig.3 Timing UP/DOWN pin.
L
.
t
t w
decreasing volume
7
increasing volume
floating
P
.
t r
t rep
source
t w
= 0 Ω at the input.
Product specification
MGK365
TDA8551