1410210-1 TE Connectivity, 1410210-1 Datasheet - Page 2

• Manufacturer Part Number: 1410210-1
• Manufacturer: TE Connectivity
• Series: Noner

Specifications of 1410210-1

• Product Type: Connector
• Type Of Connector: Backplane
• Mount Angle: Vertical
• Module Type: Center
• Data Rate (gb/s): 3.125
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Card Slot Pitch (mm [in]): 25.4 [1]
• Number Of Columns: 16
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Housing Material: Liquid Crystal Polymer (LCP)
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Density: 141 lines/inch
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant

3.
3.1.
3.2.
3.3.
3.4.
3.5.
Initial exam ination of product.
Final examination of product.
Low level contact resistance, circuit. 80 m illiohm s m axim um initial.
Low level contact resistance,
com pliant pin.
Insulation resistance.
Rev D
REQUIREM ENTS
Design and Construction
Product shall be of the design, construction and physical dim ensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions.
Test Requirem ents and Procedures Sum m ary
Test Description
Operating Voltage:
Current: 1 am pere at <30 C (single circuit, free air)
Tem perature:
-55 to 105 C
50 volts AC peak or DC
Meets requirem ents of product
drawing.
Meets visual requirem ents.
5 m illiohm s m axim um average
increase.
10 m illiohm s m axim um individual
increase.
1 m illiohm m axim um initial.
1 m illiohm m axim um change.
1000 m egohm s m inim um .
Figure 1 (continued)
ELECTRICAL
Requirem ent
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
See Figure 3.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
See Figure 4.
EIA-364-21.
Test between any adjacent pair of
signal contacts, or from any signal
contact to an adjacent ground pin of
m ated specim ens at 100 volts DC.
Procedure
108-2072
2 of 10