TSV912H STMicroelectronics, TSV912H Datasheet - Page 11

• Manufacturer Part Number: TSV912H
• Description: High temperature rail to rail input/output widebandwidth op-amps
• Manufacturer: STMicroelectronics

Specifications of TSV912H

• Low Power Consumption: 820 μA typ
• High Output Current: 35 mA

TSV912H, TSV912AH
3
3.1
3.2
Application information
Driving resistive and capacitive loads
These products are low-voltage, low-power operational amplifiers optimized to drive rather
large resistive loads above 2 kΩ .
In a follower configuration, these operational amplifiers can drive capacitive loads up to
100 pF with no oscillations. When driving larger capacitive loads, adding a small in-series
resistor at the output can improve the stability of the devices (see
recommended in-series resistor values). Once the in-series resistor value has been
selected, the stability of the circuit should be tested on bench and simulated with the
simulation model.
Figure 18. In-series resistor vs. capacitive load
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible
to the power supply pins.
Doc ID 17688 Rev 1
Figure 18
Application information
for
11/16