STM32F215VE STMicroelectronics, STM32F215VE Datasheet - Page 153

• Manufacturer Part Number: STM32F215VE
• Description: High-performance ARM Cortex-M3 MCU with 512 Kbytes Flash, 120 MHz CPU, ART Accelerator, HW crypto
• Manufacturer: STMicroelectronics

Specifications of STM32F215VE

• 10/100 Ethernet Mac With Dedicated Dma: supports IEEE 1588v2 hardware, MII/RMII

STM32F215xx, STM32F217xx
Figure 84. USB OTG FS (full speed) host-only connection
1. The current limiter is required only if the application has to support a V
2. The same application can be developed using the OTG HS in FS mode to achieve enhanced performance
Figure 85. OTG FS (full speed) connection dual-role with internal PHY
1. External voltage regulator only needed when building a V
2. The current limiter is required only if the application has to support a V
3. The ID pin is required in dual role only.
4. The same application can be developed using the OTG HS in FS mode to achieve enhanced performance
switch can be used if 5 V are available on the application board.
thanks to the large Rx/Tx FIFO and to a dedicated DMA controller.
switch can be used if 5 V are available on the application board.
thanks to the large Rx/Tx FIFO and to a dedicated DMA controller.
Doc ID 17050 Rev 6
BUS
powered device.
BUS
BUS
Application block diagrams
powered device. A basic power
powered device. A basic power
153/168