TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 623

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

Note: It cannot overlap with three or more AD conversions.
Prohibition example 1: In FIRST normal AD conversion
Prohibition example 2: In FIRST normal AD conversion
→ (Before finished FIRST normal AD conversion) Started SECOND normal AD conversion
→ (Before finished SECOND normal AD conversion) Started THIRD normal AD conversion
→ (Before finished FIRST normal AD conversion) Started SECOND normal AD conversion
→ (Before finished SECOND normal AD conversion) Started THIRD high-priority AD conversion
to “0” only when read.
abort any ongoing conversion immediately, and restart.
hard ware trigger, normal AD conversion is restarted when start condition from hard
ware trigger is satisfied. When restart is set, normal AD conversion is aborted
immediately.
to ADMOD2<HADS> or a hard ware trigger occurs), the ADC aborts any ongoing
conversion immediately, and then start a Top-priority AD conversion for the channel
specified by ADMOD3<HADCH2:0>. Upon the completion of the Top-priority
conversion, the ADC stores the conversion result to ADREGSPH/L, and then resumes
the suspended normal conversion with that channel.
<HEOS> and <EOS> are set to “1” after conversion is completed. This flag is cleared
During a normal AD conversion, writing a “1” to ADMOD0<ADS> causes the ADC to
During a normal AD conversion, if normal AD conversion starting is enabled by
During a normal AD conversion, if a Top-priority AD conversion starts (writing a “1”
92CF26A-621
TMP92CF26A
2009-06-25