TMP86xy49UG/F/NG Toshiba, TMP86xy49UG/F/NG Datasheet - Page 18

• Manufacturer Part Number: TMP86xy49UG/F/NG
• Manufacturer: Toshiba

Specifications of TMP86xy49UG/F/NG

• Package: LQFP64/QFP64/SDIP64
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 16/32/60
• Ram Size: 512/1K/2K
• Driver Led: 13
• Driver Lcd: -
• Spi/sio Channels: 2
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 56
• Power Supply (v): 4.5 to 5.5

1.1 Features
• The information contained herein is subject to change without notice. 021023_D
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equip-
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
• The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations
in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. 021023_A
ment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither
intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor failure of
which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments,
airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instru-
ments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's
own risk. 021023_B
sale are prohibited under any applicable laws and regulations. 060106_Q
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by impli-
cation or otherwise under any patent or patent rights of TOSHIBA or others. 021023_C
Reliability Assurance/Handling Precautions. 030619_S
bytes of One-Time PROM. It is pin-compatible with the TMP86CM49UG (Mask ROM version). The
TMP86PM49UG can realize operations equivalent to those of the TMP86CM49UG by programming the on-chip
PROM.
TMP86PM49UG
The TMP86PM49UG is a single-chip 8-bit high-speed and high-functionality microcomputer incorporating 32768
Product No.
1. 8-bit single chip microcomputer TLCS-870/C series
2. 24interrupt sources (External : 5 Internal : 19)
3. Input / Output ports (56 pins)
4. Watchdog Timer
5. Prescaler
6. 16-bit timer counter: 1 ch
7. 16-bit timer counter: 1 ch
- Instruction execution time :
- 132 types & 731 basic instructions
- Time base timer
- Divider output function
- Timer, External trigger, Window, Pulse width measurement,
- Timer, Event counter, Window modes
Large current output: 13pins (Typ. 20mA), LED direct drive
Event counter, Programmable pulse generate (PPG) modes
0.25 µs (at 16 MHz)
122 µs (at 32.768 kHz)
(EPROM)
32768
ROM
bytes
TMP86PM49UG
CMOS 8-Bit Microcontroller
RAM
1024
bytes
Page 1
LQFP64-P-1010-0.50D
Package
TMP86CM49UG
MASK MCU
TMP86C949XB
Emulation Chip
TMP86PM49UG
060116EBP