S1D13700F01 Epson Electronics America, Inc., S1D13700F01 Datasheet - Page 132

• Manufacturer Part Number: S1D13700F01
• Description: Embedded Memory Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Page 132
X42A-A-001-04
X42A-A-001-04
X42A-A-001-03
X42A-A-001-03
X42A-A-001-02
X42A-A-001-02
S1D13700F01
X42A-A-002-04
• REG[08h], reserved the information in the first note about disabling power save mode
• section 11.1.1, in the SYSTEM SET section, added the following note “If the
• section 15.1.1, replaced SYSTEM SET Command and Parameters section
• section 18, updated mechanical drawing sizes
• section 7.3.1, updated typos in timing table notes 4 and 5
• section 7.3.3, updated typos in timing table notes 4 and 5
• section 7.3.5, updated typos in timing table notes 4 and 5
• section 10.3, updated the register headings to include default values
• released as revision 4.0
• section 7.3.3, fixed note 6 in the table, should reference t17 parameter instead of t20
• section 7.3.4, fixed note 4 in the table, should reference t10 parameter instead of t13
• section 7.3.4, fixed note 5 in the table, should reference t12 parameter instead of t15
• released as revision 3.0
• section 2.8, removed Pb-used package
• section 5.1, changed pinout diagram to show “D1370001A1” on package instead of
• released as revision 2.0
Revision 4.01
Revision 4.0
Revision 3.01
Revision 3.0
Revision 2.01
Revision 2.0
for indirect interface and added the following information to the note as engineering text
“In indirect mode, SYSTEM SET command is used to exit power save mode. After
writing parameter P1 of SYSTEM SET command, 13700 will exit power save mode and
REG[08h]bit0=0. To complete SYSTEM SET command, parameters P2-P8 must also
be written, so the requirement for at least 2 writes to any register is automatically satis-
fied at the end of SYSTEM SET command.”
S1D13700F01 is in power save mode (at power up or after a POWER SAVE
command), the SYSTEM SET command will exit power save mode. After writing the
SYSTEM SET command and its 8 parameters, the S1D13700F01 will be in normal
operation.”
“S1D13700F01”
Revision 4.05
Epson Research and Development
Hardware Functional Specification
Vancouver Design Center
Issue Date: 2005/12/13