SMB1W-470 Roithner LaserTechnik GmbH, SMB1W-470 Datasheet - Page 2

• Manufacturer Part Number: SMB1W-470
• Description: High Power Led, Smd
• Manufacturer: Roithner LaserTechnik GmbH

07.04.2011
1. Soldering Conditions
2. Static Electricity
•
•
•
•
•
DO NOT apply any stress to the lead particularly when heat.
After soldering the LEDs should be protected from mechanical shock or vibration until the
LEDs return to room temperature.
When it is necessary to clamp the LEDs to prevent soldering failure, it is important to
minimize the mechanical stress on the LEDs.
The LEDs are very sensitive to Static Electricity and surge voltage. So it is recommended
that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
All devices, equipment and machinery must be grounded properly. It is recommended that
precautions should be taken against surge voltage to the equipment that mounts the LEDs.
Recommended Land Layout (Unit: mm)
Soldering Conditions
SMB1W-470
2 of 2