74HC174D,653 NXP Semiconductors, 74HC174D,653 Datasheet - Page 13

• Manufacturer Part Number: 74HC174D,653
• Description: IC HEX D FF POS-EDGE TRIG 16SOIC
• Manufacturer: NXP Semiconductors
• Series: 74HCr
• Type: D-Type Busr

Specifications of 74HC174D,653

• Output Type: Inverted
• Package / Case: 16-SOIC (3.9mm Width)
• Function: Master Reset
• Number Of Elements: 1
• Number Of Bits Per Element: 6
• Frequency - Clock: 107MHz
• Delay Time - Propagation: 16ns
• Trigger Type: Positive Edge
• Voltage - Supply: 2 V ~ 6 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Number Of Circuits: 1
• Logic Family: HC
• Logic Type: D-Type Edge Triggered Flip-Flop
• Polarity: Non-Inverting
• Input Type: Single-Ended
• Propagation Delay Time: 17 ns at 5 V
• High Level Output Current: - 5.2 mA
• Low Level Output Current: 5.2 mA
• Supply Voltage (max): 6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Supply Voltage (min): 2 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output High, Low: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 74HC174D-T; 74HC174D-T; 933714570653

Philips Semiconductors
R
Fix the component by first soldering two diagonally- opposite end leads. Use only a low voltage soldering iron (less
than 24 V) applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300 C. When using a
dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320 C.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1998 Jul 08
Data sheet status
Objective specification
Preliminary specification
Product specification
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
EPAIRING SOLDERED JOINTS
Hex D-type flip-flop with reset; positive-edge trigger
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
13
74HC/HCT174
Product specification