s908gr16ag4cfj Freescale Semiconductor, Inc, s908gr16ag4cfj Datasheet - Page 69

• Manufacturer Part Number: s908gr16ag4cfj
• Description: M68hc08 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

LOCK — Lock Indicator Bit
ACQ — Acquisition Mode Bit
4.5.3 PLL Multiplier Select Register High
The PLL multiplier select register high (PMSH) contains the programming information for the high byte of
the modulo feedback divider.
MUL11–MUL8 — Multiplier Select Bits
PMSH[7:4] — Unimplemented Bits
Freescale Semiconductor
When the AUTO bit is set, LOCK is a read-only bit that becomes set when the VCO clock, CGMVCLK,
is locked (running at the programmed frequency). When the AUTO bit is clear, LOCK reads as 0 and
has no meaning. The write one function of this bit is reserved for test, so this bit must always be written
as a 0. Reset clears the LOCK bit.
When the AUTO bit is set, ACQ is a read-only bit that indicates whether the PLL is in acquisition mode
or tracking mode. When the AUTO bit is clear, ACQ is a read/write bit that controls whether the PLL is
in acquisition or tracking mode.
In automatic bandwidth control mode (AUTO = 1), the last-written value from manual operation is
stored in a temporary location and is recovered when manual operation resumes. Reset clears this bit,
enabling acquisition mode.
These read/write bits control the high byte of the modulo feedback divider that selects the VCO
frequency multiplier N. (See
the multiplier select registers configures the modulo feedback divider the same as a value of $0001.
Reset initializes the registers to $0040 for a default multiply value of 64.
These bits have no function and always read as 0s.
1 = VCO frequency correct or locked
0 = VCO frequency incorrect or unlocked
1 = Tracking mode
0 = Acquisition mode
Address:
The multiplier select bits have built-in protection such that they cannot be
written when the PLL is on (PLLON = 1).
Reset:
Read:
Write:
Figure 4-6. PLL Multiplier Select Register High (PMSH)
$0038
Bit 7
0
0
= Unimplemented
4.3.3 PLL Circuits
6
0
0
MC68HC908GR16A Data Sheet, Rev. 1.0
5
0
0
NOTE
and
4
0
0
4.3.6 Programming the
MUL11
3
0
MUL10
2
0
MUL9
PLL.) A value of $0000 in
1
0
MUL8
Bit 0
0
CGM Registers
69