mc9rs08ka2 Freescale Semiconductor, Inc, mc9rs08ka2 Datasheet - Page 35

• Manufacturer Part Number: mc9rs08ka2
• Description: Rs08 Microcontrollers 8-bit Microcontroller Family
• Manufacturer: Freescale Semiconductor, Inc

Chapter 5
Resets, Interrupts, and General System Control
5.1
This chapter discusses basic reset and interrupt mechanisms and the various sources of reset and interrupt
in the MC9RS08KA2 Series. Some interrupt sources from peripheral modules are discussed in greater
detail within other chapters of this data sheet. This chapter gathers basic information about all reset and
interrupt sources in one place for easy reference. A few reset and wakeup sources, including the computer
operating properly (COP) watchdog and real-time interrupt (RTI), are not part of on-chip peripheral
systems with their own chapters but are part of the system control logic.
5.2
Reset and interrupt features include:
5.3
Resetting the MCU provides a way to start processing from a known set of initial conditions. During reset,
most control and status registers are forced to initial values and the program counter is started from
location $3FFD. A JMP instruction (opcode $BC) with operand located at $3FFE–$3FFF must be
programmed into the user application for correct reset operation. The operand defines the location at which
the user program will start. On-chip peripheral modules are disabled and I/O pins are initially configured
as general-purpose high-impedance inputs with pullup/pulldown devices disabled.
The MC9RS08KA2 Series has seven sources for reset:
Freescale Semiconductor
•
•
•
•
•
•
Multiple sources of reset for flexible system configuration and reliable operation
System reset status register (SRS) to indicate the source of the most recent reset
System interrupt pending register (SIP1) to indicate the status of pending system interrupts
— Analog comparator interrupt with enable
— Keyboard interrupt with enable
— Low-voltage detect interrupt with enable
— Modulo timer interrupt with enable
— Real-time interrupt with enable; available in stop with multiple rates based on a separate 1-kHz
External pin reset (PIN) — enabled using RSTPE in SOPT
Power-on reset (POR)
Low-voltage detect (LVD)
Introduction
Features
MCU Reset
self-clocked source
MC9RS08KA2 Series Data Sheet, Rev. 3
35