92hd98 Integrated Device Technology, 92hd98 Datasheet - Page 21

• Manufacturer Part Number: 92hd98
• Description: Datasheet
• Manufacturer: Integrated Device Technology

92HD98
SINGLE CHIP PC AUDIO SYSTEM, CODEC+MONO SPEAKER AMPLIFIER+CAPLESS HP+LDO
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
2.12. EAPD
The EAPD pin (pin 47) is a dedicated, bi-directional control pin. Although named External Amplifier
Power Down (EAPD) by the HD Audio specification, this pin operates as an external amplifier power
up signal. The EAPD value is reflected on the EAPD pin; a 1 causes the external amplifier to power
up (equivalent to D0), and a 0 causes it to power down (equivalent to D3.) When the EAPD value =
1, the EAPD pin must be placed in a state appropriate to the current power state of the associated
Pin Widget even though the EAPD value (in the register) may remain 1. The default state of this pin
is 0 (driving low.) The pin defaults to an open-drain configuration (an external pull-up is recom-
mended.)
Per the HD Audio specification and HDA015-B, multiple ports may control EAPD. The EAPD pin
assumes the highest power state of all the the EAPD bits in all of the pin complexes. The default
value of EAPD is 1 (powered on), but the FG power state will override and the pin will be low. A port
will request External Amp Power Up when its power state is active (FG and pin widget power state is
[13:11]
[10:8]
[6:4]
[3:0]
[7:4]
[3:0]
SmplRateMultp
SmplRateDiv
BitsPerSmpl
NmbrChan
Strm
Ch
Table 8: Mult-channel
21
Sample Base Rate Multiple
000=48kHz/44.1kHz or less
001= x2
010= x3 (not supported)
011= x4 192kHz only, 176.4 not supported
100-111= Reserved
Sample Base Rate Divisor
000= Divide by 1
001= Divide by 2 (not supported)
010= Divide by 3 (not supported)
011= Divide by 4 (not supported)
100= Divide by 5 (not supported)
101= Divide by 6 (not supported)
110= Divide by 7 (not supported)
111= Divide by 8 (not supported)
Bits per Sample
000= 8 bits (not supported)
001= 16 bits
010= 20 bits
011= 24 bits
100-111= Reserved
Number of Channels
Number of channels for this stream in each “sample
block” of the “packets” in each “frame” on the link.
0000=1 channel (not supported)
0001 = 2 channels
1111= 16 channels.
Software-programmable integer representing link
stream ID used by the converter widget. By conven-
tion stream 0 is reserved as unused.
Integer representing lowest channel used by con-
verter.
0 and 2 are valid Entries
If assigned to the same stream, one ADC must be
assigned a value of 0 and the other ADC assigned a
value of 2.
…
V 0.91 10/10
92HD98