MC68HC705J1AC FREESCALE [Freescale Semiconductor, Inc], MC68HC705J1AC Datasheet - Page 54

• Manufacturer Part Number: MC68HC705J1AC
• Description: Microcontrollers
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

Central Processor Unit (CPU)
3.6.1.7 Indexed, 16-Bit Offset
3.6.1.8 Relative
Technical Data
The k value is typically in the index register, and the address of the
beginning of the table is in the byte following the opcode.
Indexed, 16-bit offset instructions are 3-byte instructions that can access
data with variable addresses at any location in memory. The CPU adds
the unsigned byte in the index register to the two unsigned bytes
following the opcode. The sum is the effective address of the operand.
The first byte after the opcode is the high byte of the 16-bit offset; the
second byte is the low byte of the offset.
Indexed, 16-bit offset instructions are useful for selecting the kth element
in an n-element table anywhere in memory.
As with direct and extended addressing, the Freescale assembler
determines the shortest form of indexed addressing.
Relative addressing is only for branch instructions. If the branch
condition is true, the CPU finds the effective branch destination by
adding the signed byte following the opcode to the contents of the
program counter. If the branch condition is not true, the CPU goes to the
next instruction. The offset is a signed, two’s complement byte that gives
a branching range of –128 to +127 bytes from the address of the next
location after the branch instruction.
When using the Freescale assembler, the programmer does not need to
calculate the offset because the assembler determines the proper offset
and verifies that it is within the span of the branch.
Freescale Semiconductor, Inc.
For More Information On This Product,
Central Processor Unit (CPU)
Go to: www.freescale.com
MC68HC705J1A — Rev. 4.0