INT5130 ETC1 [List of Unclassifed Manufacturers], INT5130 Datasheet - Page 5

• Manufacturer Part Number: INT5130
• Description: Integrated Powerline MAC/PHY Transceiver
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

Pin Descriptions by Group
INTELLON CONFIDENTIAL
Rev 8.1
Media Independent Interface (MII)
These pins are multiplexed with the GPSI pins and are selected when MII_GSPI_N signal is at VDD.
MII_RX[3:0]
MII_RXCLK
MII_RXDV
MII_RX_ER
MII_TX[3:0]
MII_TXCLK
MII_TXEN
MII_TX_ER
MII_CRS
MII_COL
MII Management Data Interface (MDI)
These pins are multiplexed with the SPIS_SDO and SPIS_SCLK signals and are selected when MDI_SPIS_N is at VDD.
MII_MDIO
MII_MDCLK
Signal Name
INT5130 Integrated Powerline MAC/PHY Transceiver Technical Data Sheet
Output
Output
Output
Output
Input
Output
Input
Input
Output
Output
Input/Output
Input
I/O Pad Description
5
MII Receive Data.
Data is transferred from the INT5130 to the external
MAC across these four lines one nibble at a time.
MII Receive Clock
The receive clock outputs a continuous 25MHz clock
to the external MAC.
MII Receive Data Valid
This signal indicates that the incoming data on the
MII_RX[3:0] pins are valid.
MII Receive Error
This signal indicates to the external MAC that an
error has occurred during the frame reception.
MII Transmit Data
Data is transferred to the INT5130 from the external
MAC across these four lines one nibble at a time.
MII Transmit Clock
The transmit clock outputs a continuous 25MHz
clock to the external MAC.
MII Transmit Enable
This signal indicates to the INT5130 that valid data
is present on the MII_TX[3:0] pins.
MII Transmit Error
MII_TX_ER is activated by the external host
controller when an error condition is detected during
packet transmission. The INT5130 will ignore any
MII transmission within which MII_TX_ER is
asserted. MII_TX_ER is ignored if MII_TXEN is not
asserted.
MII Carrier Sense
This signal indicates to the external host that traffic
is present on the powerline and the host should wait
until the signal goes invalid before sending additional
data. This signal is an asynchronous output signal.
MII Collision Detect
This signal indicates to the external host that a
collision has occurred on the MII interface. This
signal is an asynchronous output signal.
MII Management Data Input/Output
This bi-directional signal carries the data for the
Management Data Interface.
MII Management Data Clock
Clock reference for the MII_MDIO signal.
Signal Description
ADVANCE INFORMATION