S9S12GA240F0MLL Freescale Semiconductor, S9S12GA240F0MLL Datasheet - Page 354

• Manufacturer Part Number: S9S12GA240F0MLL
• Description: 16-bit Microcontrollers - MCU 16BIT 240KB FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12GA240F0MLL

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 240 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-100
• Mounting Style: SMD/SMT

Security (S12XS9SECV2)
9.1.3
Once the user has programmed the Flash and EEPROM, the chip can be secured by programming the
security bits located in the options/security byte in the Flash memory array. These non-volatile bits will
keep the device secured through reset and power-down.
The options/security byte is located at address 0xFF0F (= global address 0x7F_FF0F) in the Flash memory
array. This byte can be erased and programmed like any other Flash location. Two bits of this byte are used
for security (SEC[1:0]). On devices which have a memory page window, the Flash options/security byte
is also available at address 0xBF0F by selecting page 0x3F with the PPAGE register. The contents of this
byte are copied into the Flash security register (FSEC) during a reset sequence.
The meaning of the bits KEYEN[1:0] is shown in
the MCU Using the Backdoor Key Access”
The meaning of the security bits SEC[1:0] is shown in
security is controlled by two bits. To put the device in unsecured mode, these bits must be programmed to
SEC[1:0] = ‘10’. All other combinations put the device in a secured mode. The recommended value to put
the device in secured state is the inverse of the unsecured state, i.e. SEC[1:0] = ‘01’.
356
1
2
EEPROM Array Access
Restricted NVM command set only. Please refer to the NVM wrapper block guides for detailed information.
BDM hardware commands restricted to peripheral registers only.
DBG Module Trace
NVM Commands
0xFF0F
Securing the Microcontroller
BDM
Table 9-2. Feature Availability in Unsecure and Secure Modes on S12XS
KEYEN1
7
KEYEN0
NS
✔
KEYEN[1:0]
✔
✔
✔
Table 9-3. Backdoor Key Access Enable Bits
1
6
MC9S12G Family Reference Manual,
Figure 9-1. Flash Options/Security Byte
00
01
10
11
SS
✔
✔
✔
✔
Unsecure Mode
NV5
5
NX
for more information.
ES
NV4
Table
4
EX
Table
9-3. Please refer to
Access Enabled
Backdoor Key
NV3
ST
0 (disabled)
0 (disabled)
0 (disabled)
9-4. For security reasons, the state of device
1 (enabled)
3
Rev.1.23
NS
✔
—
—
✔
1
NV2
2
SS
✔
✔
—
✔
1
2
Section 9.1.5.1, “Unsecuring
Secure Mode
NX
SEC1
1
Freescale Semiconductor
ES
SEC0
EX
0
ST