WizFi630 WIZnet, WizFi630 Datasheet - Page 21

• Manufacturer Part Number: WizFi630
• Description: WiFi / 802.11 Modules 802.11b/g/n WiFi Module
• Manufacturer: WIZnet

Specifications of WizFi630

• Rohs: yes
• Protocol Supported: 802.11 b/g/n
• Frequency Band: 2.4 GHz
• Data Rate: 150 Mbps
• Interface Type: UART
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 33 mm x 43 mm x 4.5 mm
• Minimum Operating Temperature: - 10 C

© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
2.2.5. Ad-hoc Mode
Settings for ad-hoc mode are almost the same as settings for Client (Station) Mode as previously
shown.
The difference with Client mode is that Client mode is used to connect AP.
Client Mode connects to AP, whereas ad-hoc Mode connects with stations that use the same SSID.
Both 1:1 connection and 1:N connection are possible
In case of 1:N, N is possible up to 255
Managements
Wireless
Internet
Firewall
Setting
Setting
Setting
Menu
Serial
WAN
LAN
DHCP Clients
VPN Config
Routing
Qos(802.1p)
Profile
Link Status
Site Survey
Packet Statistics
Advance
QoS
WPS
Serial Port #1
Serial Port #2
DMZ
Port Forwarding
Packet Filtering
Contents Filtering
System Security
System Mgmt
Firmware Mgmt
Config Mgmt
Port Mgmt
Packet Statistics
System Status
Detailed Menu
Internet connection setting
Local network setting
DHCP Client Information
VPN setting
Static Routing Setting
QoS(802.1p) Setting
Profile
Link Status
Site Survey
AP Wireless Statistics ( Client Mode )
Advanced Wireless Settings(Client Mode)
Station QoS/DLS(Direct Link Setup) Configurations
WPS Settings ( Client Mode )
Serial to LAN(Wired and Wireless)
DMZ
Port forwarding
Packet filtering
Contents filtering
System Security
System Management
Firmware
Config Settings
Port Setting
Packet Statistics
System Status
Description ( Link )
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.3.6
2.4.9
2.4.10
2.4.11
2.4.7.2
2.4.2.2
2.4.8
2.4.5.2
2.5
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
2.7.1
2.7.2
2.7.3
2.7.4
2.7.5
2.7.6
List Number
21