WizFi630 WIZnet, WizFi630 Datasheet - Page 50

• Manufacturer Part Number: WizFi630
• Description: WiFi / 802.11 Modules 802.11b/g/n WiFi Module
• Manufacturer: WIZnet

Specifications of WizFi630

• Rohs: yes
• Protocol Supported: 802.11 b/g/n
• Frequency Band: 2.4 GHz
• Data Rate: 150 Mbps
• Interface Type: UART
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 33 mm x 43 mm x 4.5 mm
• Minimum Operating Temperature: - 10 C

© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
2.5.1. Main Connection settings
2.5.2. Aux Connection Settings
Reconnect Interval
FlowControl
Connection
Server Port
Server Port
Baud rate
Server IP
Server IP
Protocol
Databits
Stopbits
Protocol
Status
Status
Mode
Parity
Mode
Type
Type
Enable checked : Serial to LAN is used.
Enable un-check: Serial to LAN is not used.
Protocol used in Serial to LAN communication
Serial to LAN operation mode. ( Client Mode recommended)
Enter the IP address for WizFi630 setting.
Enter the port number for remote serial data server host PC.
Interval of TCP reconnection.
Connection Type of WizFi630’s Serial LAN. ( TCP Only )
System Bootup : connected to the remote server upon bootup.
Serial Data In : once serial data comes in, connect to remote server.
Select the serial communication speed.
Select the databits.
Select the method for parity check.
Select the stopbits.
Select the method for flow control. (Option: none, Xon/Xoff, RTS/CTS)
Select whether to enable serial port or not.
Protocol used in Serial to LAN communication.
Select Server or Client Mode.
Enter the IP address for WizFi630 setting.
Enter the port number for remote serial data server host PC.
-TCP
-UDP
- Server : waits for connection.
- Client : connected to the remote server of WizFi630
- Mixed : not recommended
(end connection after inactive time)
Description
Description
50