WizFi630 WIZnet, WizFi630 Datasheet - Page 51

• Manufacturer Part Number: WizFi630
• Description: WiFi / 802.11 Modules 802.11b/g/n WiFi Module
• Manufacturer: WIZnet

Specifications of WizFi630

• Rohs: yes
• Protocol Supported: 802.11 b/g/n
• Frequency Band: 2.4 GHz
• Data Rate: 150 Mbps
• Interface Type: UART
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 33 mm x 43 mm x 4.5 mm
• Minimum Operating Temperature: - 10 C

© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
This option is used to help serial device to identify who is the received serial data’s source; the
received serial data comes from Main Port or Aux Port.
2.5.3.
2.5.4. Ethernet Data Tagging Option
H/W CMD switch
Inactivity Time:
Main Port
Character
Aux Port
Packing Condition (Incoming serial data packing condition)
Status
Type
Type
Time
Size
Data packing until the set time and then sent to server after the set time.
Data packing until the set size and then sent to the server.
Data packing until the set character and then sent to the server.
TCP/IP connection is discontinued if there is neither serial data nor network
data during the set time.
-. Enable/Disable the H/W CMD switch pin.
-. H/W CMD switch pin is the switch for sending commands from CPU to
WizFi630.
Enable or disable this option (Checked : Enable, Un-Check : Disable)
Before sending data from Main port to serial port, WizFi630 added a TAG in
the front of payload.
For example:
In-come LAN Data : “abcdegf”
Output data to Serial Port : “!MAIN!abcdegf”
Before sending data from Aux port to serial port, WizFi630 added a TAG in
the front of payload.
For example:
In-come LAN Data : “abcdegf”
Output data to Serial Port : “!AUX!abcdegf”
Description
Description
51