NAND08GAH0FZC5E NUMONYX, NAND08GAH0FZC5E Datasheet - Page 6

• Manufacturer Part Number: NAND08GAH0FZC5E
• Description: IC FLASH 8GBIT 52MHZ 153LFBGA
• Manufacturer: NUMONYX

Specifications of NAND08GAH0FZC5E

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 8G (1G x 8)
• Speed: 52MHz
• Interface: MMC, SPI
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: -25°C ~ 85°C
• Package / Case: 153-LFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Description
1
1.1
6/33
Description
The NANDxxxxH0x is an embedded flash memory storage solution with MultiMediaCard
interface (eMMC
communication media. The NANDxxxxH0x is fully compatible with MMC bus and hosts.
The NANDxxxxH0x communications are made through an advanced 13-pin bus. The bus
can be either 1-bit, 4-bit, or 8-bit in width. The device operates in high-speed mode at clock
frequencies equal to or higher than 20 MHz, which is the MMC standard. The
communication protocol is defined as a part of this MMC standard and referred to as
MultiMediaCard mode.
The device is designed to cover a wide area of applications such as smart phones,
cameras, organizers, PDA, digital recorders, MP3 players, pagers, electronic toys, etc. They
feature high performance, low power consumption, low cost and high density.
To meet the requirements of embedded high density storage media and mobile applications,
the NAND02GRH0L supports both 1.8 V supply voltage (V
voltage (V
voltage (V
The address argument for the NANDxxxxH0x is the byte address.
The device has a built-in intelligent controller which manages interface protocols, data
storage and retrieval, wear leveling, bad block management, garbage collection, and
internal ECC.
The NANDxxxxH0x makes available to the host sudden power failure safe-update
operations for the data content, by supporting reliable write features.
The device supports boot operation and sleep/awake commands. In particular, during the
sleep state the host power regulator for V
consumption of the NANDxxxxH0x.
The system performance and characteristics are given in
eMMC Standard Specification
The NANDxxxxH0x device is fully compatible with the JEDEC Standard Specification No.
JESD84-A43.
This datasheet describes the key and specific features of the NANDxxxxH0x device. Any
additional information required to interface the device to a host system and all the practical
methods for card detection and access can be found in the proper sections of the JEDEC
Standard Specification.
CCQ
CC
), and 1.8 V/3.3 V input/output voltage (V
), while the NAND02GAH0L and NAND08GAH0N support both 3.3 V supply
™
). The eMMC
™
was developed for universal low cost data storage and
NAND02GRH0L, NAND02GAH0L, NAND08GAH0N
CC
can be switched off, thus minimizing the power
CCQ
Table
).
CC
), and 1.8 V/3.3 V input/output
2,
Table
3, and
Table
4.
™