BTS728L2 Infineon Technologies, BTS728L2 Datasheet - Page 14

• Manufacturer Part Number: BTS728L2
• Description: IC HISIDE PWR SWITCH 2CH PDSO-20
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS728L2

• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 50 mOhm
• Current - Output / Channel: 4A
• Current - Peak Output: 22A
• Voltage - Supply: 4.75 V ~ 41 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-20
• Switch Type: High Side
• Power Switch Family: BTS 728
• Input Voltage: -10 to 16V
• Power Switch On Resistance: 30mOhm
• Output Current: 5.5A
• Mounting: Surface Mount
• Supply Current: 3mA
• Package Type: DSO
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 20
• Power Dissipation: 3700W
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS728L2NT; BTS728L2T; SP000011307

Package and Ordering Code
Standard: P-DSO-20-9
All dimensions in millimetres
Definition of soldering point with temperature T
upper side of solder edge of device pin 15.
Printed circuit board (FR4, 1.5mm thick, one layer
70 m, 6cm
max. power dissipation P
I
Semiconductor Group
L(NOM)
Ordering Code
Sales Code
and thermal resistance R
2
active heatsink area) as a reference for
Pin 15
tot
, nominal load current
Q67060-S7014-A2
thja
BTS 728 L2
s
:
14
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and
shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited
to warranties of non-infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions
and prices please contact your nearest Infineon Technologies Office
in Germany or our Infineon Technologies Representatives worldwide
(see address list).
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support
devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system, or
to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or
protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
BTS 728 L2
2003-Oct-01