BTS5234L Infineon Technologies, BTS5234L Datasheet - Page 27

• Manufacturer Part Number: BTS5234L
• Description: IC HIGH SIDE PWR SWITCH PDSO-12
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS5234L

• Package / Case: DSO-12
• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 45 mOhm
• Current - Output / Channel: 3.5A
• Current - Peak Output: 28A
• Voltage - Supply: 4.5 V ~ 28 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• On Resistance (max): 0.045 Ohms
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Maximum Power Dissipation: 1600 mW
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DEMOBOARDPROFETIN - BOARD DEMO PROFET V2.0BTS
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: BTS5234LT; BTS5234LXT; SP000014704; SP000271656

Smart High-Side Power Switch
BTS 5234L
Edition 2004-01-23
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
©
Infineon Technologies AG 1/31/04.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Data Sheet
27
2004-01-23