LM336D STMicroelectronics, LM336D Datasheet - Page 5

• Manufacturer Part Number: LM336D
• Description: IC VOLTAGE REFERENCE 2.5V 8-SOIC
• Manufacturer: STMicroelectronics

Specifications of LM336D

• Reference Type: Shunt
• Voltage - Output: 2.49V
• Tolerance: ±4%
• Number Of Channels: 1
• Current - Cathode: 400µA
• Current - Output: 10mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Product: Voltage References
• Topology: Shunt References
• Output Voltage: 2.5 V
• Initial Accuracy: 4 %
• Average Temperature Coefficient (typ): 20 PPM / C
• Shunt Current (max): 10 mA
• Maximum Operating Temperature: + 70 C
• Input Voltage: 2.5 V
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Shunt Current (min): 0.4 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Input: -
• Temperature Coefficient: -
• Current - Quiescent: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

LM236-LM336
4
Figure 9.
Application information
The LM236, LM336 voltage references are easier to use than zener diodes. Their low
impedance and wide current range facilitate biasing in any circuits. Besides, the breakdown
voltage or the temperature coefficient can be adjusted so as to optimize the performance of
the circuit.
Figure 9
voltage which can be adjusted without altering the temperature coefficient of the circuit. The
adjustment range is generally sufficient to adjust the initial tolerance of the circuit and the
inaccuracy of the amplifier circuit.
To obtain a lower temperature coefficient two diodes can be connected in series as
indicated in
When the circuit is adjusted to 2.49V the temperature coefficient is minimized.
For a correct temperature coefficient, the diodes should be at the same ambient
temperature as the LM336. The value of R1 is not critical (2-20kΩ).
LM336 with pot for adjustment of
breakdown voltage
represents a LM336 with a 10kΩ potentiometer to adjust the reverse breakdown
Figure
10.
Figure 10. Temperature coefficient adjustment
Application information
5/15