PVG3A502A01R00 Murata Electronics North America, PVG3A502A01R00 Datasheet - Page 5

• Manufacturer Part Number: PVG3A502A01R00
• Description: POT 5K OHM 3MM TRIM 1TRN SMD
• Manufacturer: Murata Electronics North America
• Series: PVG3r

Specifications of PVG3A502A01R00

• Resistance (ohms): 5K
• Power (watts): 0.25W, 1/4W
• Taper: Linear
• Tolerance: ±20%
• Temperature Coefficient: ±150ppm/°C
• Number Of Turns: Single
• Adjustment Type: Top Adjustment
• Mounting Type: Surface Mount
• Resistive Material: Cermet
• Package / Case: Square - 0.142" L x 0.134" W x 0.079" H (3.60mm x 3.40mm x 2.00mm)
• Resistance In Ohms: 5.00K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 490-2254-2

4
!Note
!Note
1. Use suitable screwdrivers that fit comfortably in
1. Please make sure that your product has been
2. Murata connot guarantee trimmer potentiometer
28
PVG3 Series Notice
Reflow Soldering Standard Profile
Notice (Handling)
driver slot.
* Recommended screwdriver for manual adjustment
* Recommended screwdriver bit for automatic
We can supply above screwdrivers.
If you place order, please nominate Murata P/N.
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
Continued from the preceding page.
the cleaning condition such as the depth of
immersion, please check the cleaning equipment
to determine the suitable conditions.
TORAY INDUSTRIES, INC. : SA-2225
adjustment
TORAY INDUSTRIES, INC. : JB-2225
• Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering.
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
(Murata P/N : KMDR070)
(Mutata P/N : KMBT070)
230
200
100
0
Pre-heating(in the air)
60~120 sec.
For reflow soldering
(Melting zone)
30 sec. max.
Soldering
Gradual Cooling
(in the air)
Time
2. Don't apply more than 9.8N (Ref.; 1kgf) of twist
3. When adjusting with an adjustment tool, the applied
4. When using a lock paint to fix slot position,
and stress after mounted onto PCB to prevent
contact intermittence.
force to the adjustment screw should not exceed
4.9N (Ref.; 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401series").
If the condition is not suitable, the trimmer
potentiometer may deviate from specified
characteristics.
R50E12.pdf 02.9.5