EVALSF2-ICE2A365 Infineon Technologies, EVALSF2-ICE2A365 Datasheet - Page 8

• Manufacturer Part Number: EVALSF2-ICE2A365
• Description: BOARD DEMO ICE2A365 40W SMPS
• Manufacturer: Infineon Technologies
• Series: CoolSET®F2r

Specifications of EVALSF2-ICE2A365

• Main Purpose: AC/DC, Primary Side
• Outputs And Type: 1, Isolated
• Power - Output: 40W
• Voltage - Output: 16V
• Current - Output: 2.5A
• Voltage - Input: 85 ~ 270VAC
• Regulator Topology: Flyback
• Board Type: Fully Populated
• Utilized Ic / Part: ICE2A365
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Frequency - Switching: -
• Other names: EVALSF2-ICE2A365IN

CoolSET™-F2
Pin Configuration and Functionality
1.5
Pin Functionality
SoftS (Soft Start & Auto Restart Control)
This pin combines the function of Soft Start in case of
Start Up and Auto Restart Mode and the controlling of
the Auto Restart Mode in case of an error detection.
FB (Feedback)
The information about the regulation is provided by the
FB Pin to the internal Protection Unit and to the internal
PWM-Comparator to control the duty cycle.
Isense (Current Sense)
The Current Sense pin senses the voltage developed
on the series resistor inserted in the source of the
integrated CoolMOS™. When Isense reaches the
internal threshold of the Current Limit Comparator, the
Driver output is disabled. By this means the Over
Current Detection is realized.
Furthermore the current information is provided for the
PWM-Comparator to realize the Current Mode.
Drain (Drain of integrated CoolMOS™)
Pin Drain is the connection to the Drain of the internal
TM
CoolMOS
.
VCC (Power supply)
This pin is the positive supply of the IC. The operating
range is between 8.5V and 21V.
To provide overvoltage protection the driver gets
disabled when the voltage becomes higher than 16.5V
during Start Up Phase.
GND (Ground)
This pin is the ground of the primary side of the SMPS.
Version 2.6
8
25 Dec 2006