HS1527KEPH60H Renesas Electronics America, HS1527KEPH60H Datasheet - Page 11

• Manufacturer Part Number: HS1527KEPH60H
• Description: EMULATOR BASE UNIT H8SX SERIES
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS1527KEPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8SX/1520
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2
To connect the cable head to the user system, follow the instructions below.
2.2.1
After checking the location of pin 1 on the IC socket, apply epoxy resin adhesive to the bottom of the
IC socket for an FP-100M package, and fasten it to the user system before soldering.
2.2.2
After fastening, solder the IC socket for an FP-100M package to the user system. Be sure to
completely solder the leads so that the solder slops gently over the leads and forms solder fillets.
(Use slightly more solder than the MCU.)
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are correctly
aligned. Failure to do so will result in a FIRE HAZARD and
will damage the user system and the emulator product or
will result in PERSONAL INJURY. The USER PROGRAM will
be LOST.
Connecting User System Interface Cable to User System
Always switch OFF the user system and the emulator
Installing IC Socket
Soldering IC Socket
WARNING
5