HS1527KEPH60H Renesas Electronics America, HS1527KEPH60H Datasheet - Page 12

• Manufacturer Part Number: HS1527KEPH60H
• Description: EMULATOR BASE UNIT H8SX SERIES
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS1527KEPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8SX/1520
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
Align pin 1 on the IC socket for an FP-100M package on the user system with pin 1 on the user
system interface cable head, and insert the user system interface cable head into the IC socket on the
user system, as shown in figure 3.
2.2.4
6
1. Use a Philips-type screwdriver whose head matches
2. The tightening torque must be 0.0785 N•m or less.
3. If the emulator does not operate correctly, cracks might
Inserting Cable Head
Check the location of pin 1 before inserting.
Fastening Cable Head
the screw head.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION
CAUTION