DSP56F801FA80E Freescale Semiconductor, DSP56F801FA80E Datasheet - Page 26

• Manufacturer Part Number: DSP56F801FA80E
• Description: IC DSP 80MHZ 8K FLASH 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxr

Specifications of DSP56F801FA80E

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 80MHz
• Connectivity: SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 11
• Program Memory Size: 20KB (10K x 16)
• Program Memory Type: FLASH
• Ram Size: 2K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Package: 48LQFP
• Family Name: 56F8xx
• Maximum Speed: 80 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 11
• Interface Type: SCI/SPI
• On-chip Adc: 2(4-chx12-bit)
• Number Of Timers: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

compensate for any asynchronous transitions between the two clock signals so that no glitches occur in the
resulting master clock to the chip. When changing clocks, the user must ensure that the clock source is not
switched until the desired clock is enabled and stable.
To compensate for variances in the device manufacturing process, the accuracy of the relaxation oscillator
can be incrementally adjusted to within ±0.25% of 8MHz by trimming an internal capacitor. Bits 0-7 of
the IOSCTL (internal oscillator control) word allow the user to set in an additional offset (trim) to this
preset value to increase or decrease capacitance. The default value of this trim is 128 units, making the
power-up default capacitor size 432 units. Each unit added or deleted changes the output frequency by
about 0.2%, allowing incremental adjustment until the desired frequency accuracy is achieved.
26
Frequency Accuracy
Frequency Drift over Temp
Frequency Drift over Supply
Trim Accuracy
1. Over full temperature range.
Operating Conditions:
Characteristic
1
Table 3-9 Relaxation Oscillator Characteristics
V
56F801 Technical Data, Rev. 17
SS
= V
Symbol
Δf/ΔV
SSA
Δf/Δt
Δf
Δf
T
= 0 V, V
DD
= V
Min
—
—
—
—
DDA
= 3.0–3.6 V, T
+0.25
+0.1
Typ
0.1
+2
A
= –40° to +85°C
Max
+5
—
—
—
Freescale Semiconductor
%/
Unit
%/V
%
%
o
C