PIC18F6490-E/PT Microchip Technology, PIC18F6490-E/PT Datasheet - Page 124

• Manufacturer Part Number: PIC18F6490-E/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6490-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, LCD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• For Use With: DM163028 - BOARD DEMO PICDEM LCD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

PIC18F6390/6490/8390/8490
9.6
PORTF is an 8-bit wide, bidirectional port. The corre-
sponding Data Direction register is TRISF. Setting a
TRISF bit (= 1) will make the corresponding PORTF pin
an input (i.e., put the corresponding output driver in a
high-impedance mode). Clearing a TRISF bit (= 0) will
make the corresponding PORTF pin an output (i.e., put
the contents of the output latch on the selected pin).
The Data Latch register (LATF) is also memory
mapped. Read-modify-write operations on the LATF
register read and write the latched output value for
PORTF.
All pins on PORTF are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTF is multiplexed with several analog peripheral
functions, including the A/D converter inputs and
comparator inputs, outputs and voltage reference.
PORTF is also multiplexed with LCD segment drives
controlled by bits in the LCDSE2 and LCDSE3
registers. I/O port functions are only available when the
segments are disabled.
DS39629C-page 122
Note 1: On a Power-on Reset, the RF6:RF0 pins
PORTF, LATF and TRISF Registers
2: To configure PORTF as digital I/O, turn off
are configured as inputs and read as ‘0’.
comparators and set ADCON1 value.
EXAMPLE 9-6:
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
MOVLW
MOVWF
PORTF
LATF
0x07
CMCON
0x0F
ADCON1 ; Set PORTF as digital I/O
0xCF
TRISF
; Initialize PORTF by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
;
; Turn off comparators
;
; Value used to
; initialize data
; direction
; Set RF3:RF0 as inputs
; RF5:RF4 as outputs
; RF7:RF6 as inputs
INITIALIZING PORTF
© 2007 Microchip Technology Inc.