PIC18F6490-E/PT Microchip Technology, PIC18F6490-E/PT Datasheet - Page 129

• Manufacturer Part Number: PIC18F6490-E/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6490-E/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, LCD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• For Use With: DM163028 - BOARD DEMO PICDEM LCD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

9.8
PORTH is an 8-bit wide, bidirectional I/O port. The cor-
responding Data Direction register is TRISH. Setting a
TRISH bit (= 1) will make the corresponding PORTH
pin an input (i.e., put the corresponding output driver in
a high-impedance mode). Clearing a TRISH bit (= 0)
will make the corresponding PORTH pin an output (i.e.,
put the contents of the output latch on the selected pin).
The Data Latch register (LATH) is also memory
mapped. Read-modify-write operations on the LATH
register read and write the latched output value for
PORTH.
All pins on PORTH are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTH is also multiplexed with LCD segment drives
controlled by the LCDSE5 register. I/O port functions
are only available when the segments are disabled.
© 2007 Microchip Technology Inc.
Note:
Note:
PORTH, LATH and
TRISH Registers
PORTH is available only on 80-pin
devices.
On a Power-on Reset, these pins are
configured as digital inputs.
PIC18F6390/6490/8390/8490
EXAMPLE 9-8:
CLRF
CLRF
MOVLW
MOVWF
PORTH
LATH
0CFh
TRISH
INITIALIZING PORTH
; Initialize PORTH by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Value used to
; initialize data
; direction
; Set RH3:RH0 as inputs
; RH5:RH4 as outputs
; RH7:RH6 as inputs
DS39629C-page 127