DSPIC33FJ12MC202-I/SS Microchip Technology, DSPIC33FJ12MC202-I/SS Datasheet - Page 179

• Manufacturer Part Number: DSPIC33FJ12MC202-I/SS
• Description: IC DSPIC MCU/DSP 12K 28SSOP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ12MC202-I/SS

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Core Frequency: 40MHz
• Core Supply Voltage: 2.75V
• Embedded Interface Type: I2C, JTAG, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

18.0
The Universal Asynchronous Receiver Transmitter
(UART) module is one of the serial I/O modules
available in the dsPIC33FJ12MC201/202 device
family. The UART is a full-duplex asynchronous system
that can communicate with peripheral devices, such as
personal computers, LIN, and RS-232, and RS-485
interfaces. The module also supports a hardware flow
control option with the UxCTS and UxRTS pins and
also includes an IrDA
The primary features of the UART module are:
• Full-Duplex, 8-bit or 9-bit Data Transmission
• Even, Odd, or No Parity Options (for 8-bit data)
• One or two stop bits
FIGURE 18-1:
© 2008 Microchip Technology Inc.
Note:
through the UxTX and UxRX pins
UNIVERSAL ASYNCHRONOUS
RECEIVER TRANSMITTER
(UART)
This data sheet summarizes the features
of the dsPIC33FJ12MC201/202 family of
devices. It is not intended to be a
comprehensive reference source.
complement the information in this data
sheet, refer to the dsPIC33F Family
Reference Manual, “Section 17. UART”
(DS70188), which is available on the
Microchip website (www.microchip.com).
®
UART SIMPLIFIED BLOCK DIAGRAM
encoder and decoder.
Hardware Flow Control
Baud Rate Generator
UART Transmitter
UART Receiver
IrDA
®
Preliminary
To
dsPIC33FJ12MC201/202
• Hardware flow control option with UxCTS and
• Fully integrated Baud Rate Generator with 16-bit
• Baud rates ranging from 1 Mbps to 15 bps at 16x
• Baud rates ranging from 4 Mbps to 61 bps at 4x
• 4-deep First-In First-Out (FIFO) Transmit Data
• 4-deep FIFO Receive Data buffer
• Parity, framing and buffer overrun error detection
• Support for 9-bit mode with Address Detect
• Transmit and Receive interrupts
• A separate interrupt for all UART error conditions
• Loopback mode for diagnostic support
• Support for sync and break characters
• Support for automatic baud rate detection
• IrDA encoder and decoder logic
• 16x baud clock output for IrDA support
A simplified block diagram of the UART module is
shown in Figure 18-1. The UART module consists of
these key hardware elements:
• Baud Rate Generator
• Asynchronous Transmitter
• Asynchronous Receiver
UxRTS pins
prescaler
mode at 40 MIPS
mode at 40 MIPS
buffer
(9th bit = 1)
BCLK
UxRTS
UxCTS
UxRX
UxTX
DS70265C-page 177