ST7FLI49MK1T6 STMicroelectronics, ST7FLI49MK1T6 Datasheet - Page 108

• Manufacturer Part Number: ST7FLI49MK1T6
• Description: MCU 8BIT SGL VOLT FLASH 32-LQFP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLI49MK1T6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Processor Series: ST7FLI4x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: I2C
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

On-chip peripherals
11.4
11.4.1
11.4.2
11.4.3
108/188
I
Introduction
The I
bus. It provides both multimaster and slave functions, and controls all I
sequencing, protocol, arbitration and timing. It supports fast I
Main features
●
●
●
●
●
●
I
●
●
●
●
●
●
●
I
●
●
●
●
●
●
●
General description
In addition to receiving and transmitting data, this interface converts it from serial to parallel
format and vice versa, using either an interrupt or polled handshake. The interrupts are
enabled or disabled by software. The interface is connected to the I
(SDAI) and by a clock pin (SCLI). It can be connected both with a standard I
Fast I
2
2
2
C master features:
C slave features:
C bus interface (I
Parallel-bus/I
Multi-master capability
7-bit/10-bit addressing
Transmitter/receiver flag
End-of-byte transmission flag
Transfer problem detection
Clock generation
I
Arbitration lost flag
End of byte transmission flag
Transmitter/receiver Flag
Start bit detection flag
Start and stop generation
Stop bit detection
I
Detection of misplaced start or stop condition
Programmable I
Transfer problem detection
End-of-byte transmission flag
Transmitter/Receiver flag
2
2
2
2
C Bus Interface serves as an interface between the microcontroller and the serial I
C bus busy flag
C bus busy flag
C bus. This selection is made by software.
2
C protocol converter
2
C address detection
2
C)
Doc ID 13562 Rev 3
2
C mode (400 kHz).
2
C bus by a data pin
2
C bus-specific
2
C bus and a
ST7LITE49M
2
C