S9S08AW16AE0MFT Freescale Semiconductor, S9S08AW16AE0MFT Datasheet - Page 83

• Manufacturer Part Number: S9S08AW16AE0MFT
• Description: MCU 16K FLASH AUTO MONET 48-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of S9S08AW16AE0MFT

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD. POR, PWM, WDT
• Number Of I /o: 38
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-QFN Exposed Pad
• Controller Family/series: HCS08
• No. Of I/o's: 38
• Ram Memory Size: 1KB
• Cpu Speed: 40MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: S08AW
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08AW60E
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Height: 1 mm
• Length: 7 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 7 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Port B pins are general-purpose I/O pins. Parallel I/O function is controlled by the port B data (PTBD) and
data direction (PTBDD) registers which are located in page zero register space. The pin control registers,
pullup enable (PTBPE), slew rate control (PTBSE), and drive strength select (PTBDS) are located in the
high page registers. Refer to
general-purpose I/O control and
Port B general-purpose I/O are shared with the ADC. Any pin enabled as an ADC input will have the
general-purpose I/O function disabled. Refer to
(S08ADC10V1)” for more information about using port B as analog inputs.
6.3.3
Port C pins are general-purpose I/O pins. Parallel I/O function is controlled by the port C data (PTCD) and
data direction (PTCDD) registers which are located in page zero register space. The pin control registers,
pullup enable (PTCPE), slew rate control (PTCSE), and drive strength select (PTCDS) are located in the
high page registers. Refer to
general-purpose I/O control and
Port C general-purpose I/O is shared with SCI2, IIC, and MCLK. When any of these shared functions is
enabled, the direction, input or output, is controlled by the shared function and not by the data direction
register of the parallel I/O port. Also, for pins which are configured as outputs by the shared function, the
output data is controlled by the shared function and not by the port data register.
Refer to
port C pins as SCI pins.
Refer to
as IIC pins.
Refer to
PTC2 as the MCLK pin.
6.3.4
Port D pins are general-purpose I/O pins. Parallel I/O function is controlled by the port D data (PTDD) and
data direction (PTDDD) registers which are located in page zero register space. The pin control registers,
Freescale Semiconductor
Port C
Port D
Chapter 11, “Serial Communications Interface
Chapter 13, “Inter-Integrated Circuit
Chapter 5, “Resets, Interrupts, and System
Port C
Port D
MCU Pin:
MCU Pin:
AD1P15/
KBI1P7
PTD7/
Section 6.4, “Parallel I/O
Section 6.4, “Parallel I/O
Bit 7
Bit 7
Section 6.5, “Pin
Section 6.5, “Pin
TPM1CLK
AD1P14/
PTC6
PTD6/
Figure 6-3. Port C Pin Names
Figure 6-4. Port D Pin Names
MC9S08AW60 Data Sheet, Rev 2
6
6
(S08IICV1)” for more information about using port C pins
AD1P13/
PTC5/
RxD2
PTD5/
Chapter 14, “Analog-to-Digital Converter
5
5
Control” for more information about pin control.
Control” for more information about pin control.
Configuration” for more information about using
TPM2CLK
Control” for more information about
Control” for more information about
AD1P12/
PTC4
(S08SCIV2)” for more information about using
PTD4/
3
4
AD1P11/
KBI1P6
PTC3/
PTD3/
TxD2
3
3
AD1P10/
KBI1P5
PTC2/
MCLK
PTD2/
2
2
Chapter 6 Parallel Input/Output
PTC1/
AD1P9
SDA1
PTD1/
1
1
PTC0/
AD1P8
SCL1
PTD0/
Bit 0
Bit 0
83