MCHC908MR8CFAE Freescale Semiconductor, MCHC908MR8CFAE Datasheet - Page 361

• Manufacturer Part Number: MCHC908MR8CFAE
• Description: IC MCU 8K FLASH 8MHZ PWM 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908MR8CFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Controller Family/series: HC08
• No. Of I/o's: 16
• Ram Memory Size: 256Byte
• Cpu Speed: 8MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: HC08MR
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

comparator — A device that compares the magnitude of two inputs. A digital comparator defines
computer operating properly module (COP) — A counter module in the M68HC08 Family that
condition code register (CCR) — An 8-bit register in the CPU08 that contains the interrupt
control bit — One bit of a register manipulated by software to control the operation of the
control unit — One of two major units of the CPU. The control unit contains logic functions that
COP — See computer operating properly module (COP).
counter clock — The input clock to the TIM counter. This clock is an output of the prescaler
CPU — See central processor unit (CPU).
CPU08 — The central processor unit of the M68HC08 Family.
CPU cycles — A CPU clock cycle is one period of the internal bus-rate clock, f
CPU registers — Memory locations that are wired directly into the CPU logic instead of being
MC68HC908MR8 — Rev 4.1
Freescale Semiconductor
•
•
•
•
•
the equality or relative differences between two binary numbers.
resets the MCU if allowed to overflow.
mask bit and five bits that indicate the results of the instruction just executed.
module.
synchronize the machine and direct various operations. The control unit decodes instructions
and generates the internal control signals that perform the requested operations. The outputs
of the control unit drive the execution unit, which contains the arithmetic logic unit (ALU), CPU
registers, and bus interface.
sub-module. The frequency of the counter clock is f
derived by dividing a crystal oscillator source by two or more so the high and low times will
be equal. The length of time required to execute an instruction is measured in CPU clock
cycles.
part of the addressable memory map. The CPU always has direct access to the information
in these registers. The CPU registers in an M68HC08 are:
A, 8-bit accumulator
H:X, 16-bit index register
SP, 16-bit stack pointer
PC, 16-bit program counter
CCR, condition code register containing the V, H, I, N, Z, and C bits
TCNT
, and the period is t
TCNT
OP
, normally
.
Technical Data
361