R5F21356CNFP#U0 Renesas Electronics America, R5F21356CNFP#U0 Datasheet - Page 184

• Manufacturer Part Number: R5F21356CNFP#U0
• Description: MCU 1KB FLASH 32K ROM 52-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/35Cr

Specifications of R5F21356CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 47
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/35C Group
REJ09B0567-0100 Rev.1.00 Dec. 14, 2009
Page 151 of 725
11. Interrupts
11.1
Figure 11.1
11.1.1
Interrupts
Notes:
1. Peripheral function interrupts are generated by the peripheral functions in the MCU.
2. Do not use these interrupts. This is provided exclusively for use by development tools.
3. A non-maskable or maskable interrupt can be selected by bits IRQ1SEL and IRQ2SEL in the CMPA register.
Figure 11.1 shows the Types of Interrupts.
•
•
Maskable interrupts:
Non-maskable interrupts:
Overview
Types of Interrupts
Types of Interrupts
Software
Hardware
(non-maskable interrupts)
These interrupts are enabled or disabled by the interrupt enable flag (I flag).
These interrupts are not enabled or disabled by the interrupt enable flag (I flag).
The interrupt priority can be changed based on the interrupt priority level.
The interrupt priority cannot be changed based on the interrupt priority level.
Special
(non-maskable interrupts)
Peripheral function
(maskable interrupts)
(1)
Undefined instruction (UND instruction)
Overflow (INTO instruction)
BRK instruction
INT instruction
Watchdog timer
Oscillation stop detection
Voltage monitor 1
Voltage monitor 2
Single step
Address break
Address match
(2)
(2)
(3)
(3)
11. Interrupts