R5F21356CNFP#U0 Renesas Electronics America, R5F21356CNFP#U0 Datasheet - Page 740

• Manufacturer Part Number: R5F21356CNFP#U0
• Description: MCU 1KB FLASH 32K ROM 52-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/35Cr

Specifications of R5F21356CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 47
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/35C Group
REJ09B0567-0100 Rev.1.00 Dec. 14, 2009
Page 707 of 725
Figure 34.5
34.9.9
The count source fOCO40M can be used with supply voltage VCC = 2.7 to 5.5 V. For supply voltage other than
that, do not set bits TCK2 to TCK0 in registers TRDCR0 and TRDCR to 110b (select fOCO40M as the count
source).
When the value in the buffer register is set to 0000h:
Transfer takes place at compare match between registers TRD0 and TRDGRA0.
After this, when the buffer register is set to 0001h or above and a smaller value than the value of the
TRDGRA0 register, and a compare match occurs between registers TRD0 and TRDGRA0 for the first time
after setting, the value is transferred to the general register. After that, the value is transferred with the timing
selected by bits CMD1 to CMD0.
TRDGRD0 register
TRDGRB0 register
Count Source fOCO40M
TRDIOB0 output
TRDIOD0 output
The above applies under the following conditions:
• Bits CMD1 to CMD0 in the TRDFCR register are set to 10b (data in the buffer register is transferred at underflow of the TRD1 register in
• Both the OLS0 and OLS1 bits in the TRDFCR register are set to 1 (active “H” for normal-phase and counter-phase).
PWM mode).
Mode
Operation when Value in Buffer Register Is Set to 0000h in Complementary PWM
0000h
m+1
n2
n1
Transfer with timing
set by bits CMD1 to
CMD0
n2
Transfer
n1
n1
Transfer
Transfer at compare
match between
registers TRD0 and
TRDGRA0 because
content in TRDGRD0
register is set to
0000h.
0000h
0000h
m: Value set in TRDGRA0 register
Transfer at compare
match between
registers TRD0 and
TRDGRA0 because
of first setting to
0001h ≤ n1 < m
n1
Transfer
n1
Count value in TRD0 register
Transfer with timing
set by bits CMD1 to
CMD0
Transfer
Count value in TRD1 register
34. Usage Notes