R5F21356CNFP#U0 Renesas Electronics America, R5F21356CNFP#U0 Datasheet - Page 682

• Manufacturer Part Number: R5F21356CNFP#U0
• Description: MCU 1KB FLASH 32K ROM 52-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/35Cr

Specifications of R5F21356CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 47
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/35C Group
REJ09B0567-0100 Rev.1.00 Dec. 14, 2009
Page 649 of 725
31.4.12 Full Status Check
Table 31.6
Note:
1
1
0
1. When FFh is written in the second bus cycle of these commands, the MCU enters read array mode.
FST Register Status
FST5
If an error occurs, bits FST4 and FST5 in the FST register are set to 1, indicating the occurrence of an error. The
execution result can be confirmed by checking these status bits (full status check).
Table 31.6 lists the Errors and FST Register Status. Figure 31.17 shows the Full Status Check and Handling
Procedure for Individual Errors.
At the same time, the command code written in the first bus cycle is invalid.
1
0
1
Errors and FST Register Status
FST4
Command
sequence error
Erase error
Blank check error When the block blank check command is executed and
Program error/
lock bit program
error
Error
• When a command is not written correctly.
• When data other than valid data (i.e., D0h or FFh) is
• The erase command is executed during suspend
• The command is executed to the block during suspend
When the block erase command is executed, but auto-
erasure does not complete correctly.
data other than blank data FFh is read.
When the program command is executed, but auto-
programming does not complete correctly.
written in the second bus cycle of the block erase
command
(1)
.
Error Occurrence Condition
31. Flash Memory