HD64F3642AH Renesas Electronics America, HD64F3642AH Datasheet - Page 339

• Manufacturer Part Number: HD64F3642AH
• Description: IC H8 MCU FLASH 16K 64QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD64F3642AH

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Transmitting: Figure 10.11 shows an example of a flowchart for data transmission. This
procedure should be followed for data transmission after initializing SCI3.
Figure 10.11 Example of Data Transmission Flowchart (Asynchronous Mode)
1
2
3
Clear bit TE to 0
Read bit TDRE
Read bit TEND
Continue data
Write transmit
transmission?
Break output?
Set PDR = 0,
data to TDR
TDRE = 1?
TEND = 1?
PCR = 1
in SCR3
in SSR
in SSR
Start
End
Yes
No
Yes
Yes
No
Yes
No
No
1.
2.
3.
Read the serial status register (SSR)
and check that bit TDRE is set to 1,
then write transmit data to the transmit
data register (TDR). When data is
written to TDR, bit TDRE is cleared to 0
automatically.
When continuing data transmission,
be sure to read TDRE = 1 to confirm that
a write can be performed before writing
data to TDR. When data is written to
TDR, bit TDRE is cleared to 0
automatically.
If a break is to be output when data
transmission ends, set the port PCR to 1
and clear the port PDR to 0, then clear bit
TXD in PMR7 and bit TE in SCR3 to 0.
Section 10 Serial Communication Interface
Rev. 6.00 Sep 12, 2006 page 317 of 526
REJ09B0326-0600