DF2317VTE25 Renesas Electronics America, DF2317VTE25 Datasheet - Page 70

MCU 3V 128K 100-TQFP

DF2317VTE25

Manufacturer Part Number
DF2317VTE25
Description
MCU 3V 128K 100-TQFP
Manufacturer
Renesas Electronics America
Series
H8® H8S/2300r
Datasheet

Specifications of DF2317VTE25

Core Processor
H8S/2000
Core Size
16-Bit
Speed
25MHz
Connectivity
SCI, SmartCard
Peripherals
POR, PWM, WDT
Number Of I /o
79
Program Memory Size
128KB (128K x 8)
Program Memory Type
FLASH
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 3.6 V
Data Converters
A/D 8x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 75°C
Package / Case
100-TQFP, 100-VQFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-
Other names
HD64F2317VTE25
HD64F2317VTE25

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DF2317VTE25V
Manufacturer:
AD
Quantity:
3 643
Part Number:
DF2317VTE25V
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Section 2 CPU
Free area
SP (ER7)
Stack area
Figure 2.6 Stack
2.4.3
Control Registers
The control registers are the 24-bit program counter (PC), 8-bit extended control register (EXR),
and 8-bit condition-code register (CCR).
(1) Program Counter (PC)
This 24-bit counter indicates the address of the next instruction the CPU will execute. The length
of all CPU instructions is 2 bytes (one word), so the least significant PC bit is ignored (When an
instruction is fetched, the least significant PC bit is regarded as 0).
(2) Extended Control Register (EXR)
This 8-bit register contains the trace bit (T) and three interrupt mask bits (I2 to I0).
Bit 7—Trace Bit (T): Selects trace mode. When this bit is cleared to 0, instructions are executed
in sequence. When this bit is set to 1, a trace exception is generated each time an instruction is
executed.
Bits 6 to 3—Reserved: These bits are reserved. They are always read as 1.
Bits 2 to 0—Interrupt Mask Bits (I2 to I0): These bits designate the interrupt mask level (0 to
7). For details, refer to section 5, Interrupt Controller.
Operations can be performed on the EXR bits by the LDC, STC, ANDC, ORC, and XORC
instructions. All interrupts, including NMI, are disabled for three states after one of these
instructions is executed, except for STC.
Rev.7.00 Feb. 14, 2007 page 36 of 1108
REJ09B0089-0700

Related parts for DF2317VTE25