SAK-XC866-2FRA BE Infineon Technologies, SAK-XC866-2FRA BE Datasheet - Page 57

• Manufacturer Part Number: SAK-XC866-2FRA BE
• Description: IC MCU 8BIT 4KB FLASH 38TSSOP
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAK-XC866-2FRA BE

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

3.6
The XC866 microcontroller requires two different levels of power supply:
• 3.3 V or 5.0 V for the Embedded Voltage Regulator (EVR) and Ports
• 2.5 V for the core, memory, on-chip oscillator, and peripherals
Figure 20
must be provided from the external power supply pin. The 2.5 V power supply for the
logic is generated by the EVR. The EVR helps to reduce the power consumption of the
whole chip and the complexity of the application board design.
The EVR consists of a main voltage regulator and a low power voltage regulator. In
active mode, both voltage regulators are enabled. In power-down mode, the main
voltage regulator is switched off, while the low power voltage regulator continues to
function and provide power supply to the system with low power consumption.
Figure 20
EVR Features:
• Input voltage (V
• Output voltage (V
• Low power voltage regulator provided in power-down mode
• V
• V
Data Sheet
DDC
DDC
and V
brownout detection
shows the XC866 power supply system. A power supply of 3.3 V or 5.0 V
Power Supply System with Embedded Voltage Regulator
XC866 Power Supply System
DDP
DDP
prewarning detection
Memory
CPU &
(P0-P3)
DDC
GPIO
Ports
): 3.3 V/5.0 V
): 2.5 V ± 7.5%
On-chip
OSC
EVR
V
D D C
Peripheral
(2.5V)
53
logic
V
V
D DP
SSP
(3.3V/5.0V)
XTAL1&
FLASH
XTAL2
ADC
PLL
Functional Description
V1.2, 2007-10
XC866