MTCBA-C1-N16 Multi-Tech Systems, MTCBA-C1-N16 Datasheet - Page 19

• Manufacturer Part Number: MTCBA-C1-N16
• Description: MODEM ETHERNET
• Manufacturer: Multi-Tech Systems

Specifications of MTCBA-C1-N16

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Aeris Networks (USA)
• Interface: RS-232
• Data Rate - Maximum: 153.6 kbps
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4976016

Restore Factory Settings &F
Description:
Note:
Syntax:
Save Configuration &W
Description:
Syntax:
Reset to Default Configuration Z0
Description:
Syntax:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command is used to restore the factory settings from NV memory. This is a standard
Hayes® modem AT command.
See Appendix "Effects of AT&W, ATZ and AT&F
There is a remote chance of NV memory corruption if a reset or power loss occurs during the
processing of this command. This command should be used only during the initial setup of the
operating characteristics.
Command syntax: AT&F
This command writes the current configuration to NV. See table in Chapter 19 for a list of items.
This is a standard Hayes® modem AT command.
Command syntax: AT&W
This command is used to restore the configuration last saved by AT&W.
Command syntax: ATZ0
Command
AT&F
Command
AT&W
Command
ATZ0
Note: reset to default configuration.
OK
Note: Command valid, modem resets
Possible Responses
Possible Responses
OK
Note: Command valid
Possible Responses
OK
Note: Command is valid
Chapter 6 – Global Configuration Commands
19