MTCBA-C1-N16 Multi-Tech Systems, MTCBA-C1-N16 Datasheet - Page 31

• Manufacturer Part Number: MTCBA-C1-N16
• Description: MODEM ETHERNET
• Manufacturer: Multi-Tech Systems

Specifications of MTCBA-C1-N16

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Aeris Networks (USA)
• Interface: RS-232
• Data Rate - Maximum: 153.6 kbps
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4976016

Line Termination Character S3
Description:
Syntax:
Values:
Response Formatting Character S4
Description:
Syntax:
Values:
Command Edit Character S5
Description:
Syntax:
Values:
Connection Completion Timeout S7
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command is used to terminate an incoming command line. The value is not persistent.
Command syntax: ATS3=<value>
<char>
This command sets the value of the AT defined character when formatting the result codes and
information text. It is used together with the ATS3 command. The value is not persistent.
Command syntax: ATS4=<value>
<char>
This command sets the value of the defined character for deleting the immediately preceding
character from the command line. The value is not persistent.
Command syntax: ATS5=<value>
<char>
This command defines the maximum time allowed between completion of dialing and the
connection being established. If this time is exceeded, then the connection is aborted. The value
is not persistent.
Command syntax: ATS7=<value>
<value>
Command
ATS3=13
Note: Set detection character to carriage return
Command
ATS4=10
Note: Set detection character to line feed
Command
ATS5=8
Note: Set detection character to backspace
Command
ATS7=100
1 – 127
1 – 127
1 – 127
1 – 255
Character decimal representation
Escape character (default is 13 or the carriage return character)
Character decimal representation
Escape character (default is 10 or the carriage return character)
Character decimal representation
Escape character (default is 8 or the carriage return character)
Timeout in seconds
Default value is 50
Possible Responses
OK
Possible Responses
OK
Possible Responses
OK
Possible Responses
OK
Chapter 8 – Communication Commands
31