MTCBA-C1-N16 Multi-Tech Systems, MTCBA-C1-N16 Datasheet - Page 92

• Manufacturer Part Number: MTCBA-C1-N16
• Description: MODEM ETHERNET
• Manufacturer: Multi-Tech Systems

Specifications of MTCBA-C1-N16

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Aeris Networks (USA)
• Interface: RS-232
• Data Rate - Maximum: 153.6 kbps
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4976016

Set NAI for Active Profile $QCMIPNAI
Description:
Syntax:
Values:
Set Reverse Tunneling $QCMIPRT
Description:
Syntax:
Values:
Note:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command is used to set the network access identifier (NAI) for the currently active profile.
Note: Writing the NAI is not allowed for a Verizon configuration. Command will return ERROR if
the modem is configured for Verizon.
Command syntax: AT$QCMIPNAI=<String>,<Val>
<String>
<Val>
This command is used to set the reverse tunneling for the currently active profile.
Command syntax: AT$QCMIPRT=<Val1>, <Val2>
<Val1>
<Val2>
If the value provisioned is not committed to NV, the temporary value will be deleted.
Command
AT$QCMIPNAI?
Note: Display the current setting
AT$QCMIPNAI=?
Note: Display the range of accepted
character values.
AT$QCMIPNAI="myName@myDomain.
com,0
Note: Non-committed value set
Command
AT$QCMIPRT?
Note: Display the current setting
AT$QCMIPRT=?
Note: Display the range of values
AT$QCMIPRT=1,1
Note: Set value to 1 and commit
0
1
0
1
0
1
The network access identifier text to be stored.
Do not commit to NV
Commit to NV
Do not request reverse tunneling
Request reverse tunneling
Do not commit to NV
Commit to NV
Possible Responses
$QCMIPRT: 1,1
OK
Note: Command is valid
$QCMIPRT: (0-1), (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
Possible Responses
Wavecom 1 @myprovider.com,1
OK
Note: Command is valid
$QCMIPNAI: (20,21,23-7E),(0-1)
OK
Note: ASCII hexadecimal character range
supported by this command. (All non-control
codes.)
OK
Note: NAI is now: [e-mail]
Chapter 16 – Data Commands
92