MTCBA-C1-N16 Multi-Tech Systems, MTCBA-C1-N16 Datasheet - Page 87

• Manufacturer Part Number: MTCBA-C1-N16
• Description: MODEM ETHERNET
• Manufacturer: Multi-Tech Systems

Specifications of MTCBA-C1-N16

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Aeris Networks (USA)
• Interface: RS-232
• Data Rate - Maximum: 153.6 kbps
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4976016

Special Considerations:
Example:
Speaker Driver Gain +WSDG
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
If no argument is supplied to the command, the default value is assumed. The configuration is
saved immediately. See the Audio Overview section for more information.
If +WDGR is set to +12dB gain, the +CLVL command cannot add any more positive gain. Setting
the +CLVL command to +12dB gain would not yield a total of +24dB gain, since the gain stage
can only supply a maximum of +12dB gain.
The following formulas govern the total digital receive gain:
Total Gain = (WDGR Gain + CLVL Gain)
-84dB <= Total Gain <= +12dB
This command sets the 8 Ohm speaker driver gain of the current audio path. Note from the
diagram at the top of this section that only the Analog 2 audio path has a speaker driver. Setting
the speaker driver gain on other audio paths has no effect.
Command Syntax: AT+WSDG=<Level>
<Level>
If no argument is supplied to the command, the default value is assumed. The configuration is
saved immediately. See the Audio Overview section for more information.
5
6
7
8
9
10
11
12
Command
AT+WSDG
AT+WSDG=7
AT+WSDG?
Note: Interrogate value
AT+WSDG=?
Note: Test command
0
1
2
3
4
5
6
7
The +CLVL gain value is added onto the +WDGR gain. Depending on the gain
setting of +WDGR, the full range of the +CLVL command may not be realized.
-16dB
-12dB
-8dB
-4dB
0dB (default)
4dB
8dB
12dB
-16dB
-12dB
-8dB
-4dB
0dB (default)
4dB
8dB
12dB
Possible Responses
OK
Note: Sets default value of 4
OK
Note: Command valid
+CLVL: 7
OK
Note: Current value
+CLVL: (0-7)
OK
Note: Possible values
Chapter 15 – Audio Commands
87